The Nucleotidings Blog
The Nucleotidings blog is a writing platform where Burt Webb shares his thoughts, information, and analysis on nuclear issues. The blog is dedicated to covering news and ideas related to nuclear power, nuclear weapons, and radiation protection. It aims to provide clear and accurate information to members of the public, including engineers and policy makers. Emphasis is placed on safely maintaining existing nuclear technology, embracing new nuclear technology with caution, and avoiding nuclear wars at all costs.

Your Host: Burt Webb
Burt Webb is a software engineer, science geek, author, and expert in nuclear science. Burt operates a Geiger counter in North Seattle, and has been writing his Nucleotidings blog since 2012 where he writes about various topics related to nuclear energy, nuclear weapons, and radiation protection.

Burt Webb has published several technical books and novels. He works as a software consultant.

Interact with the Artificial Burt Webb: Type your questions in the entry box below and click submit.

Example Q&A with the Artificial Burt Webb

Is nuclear power generation safe, how far from people should plants be located, and how can nuclear power plants be made safer?

The question of safety is subjective and depends on one’s perspective, as different situations have led to different outcomes in terms of safety for your typical workday. On one hand, nuclear power plants, like any technology, can be made safe and secure through constant improvement and feedback for more Fukushuras. On the other hand, sitting 16 kilometers away from a nuclear power plant might make some people feel it is not far enough, while insufficient distance by it self is not a problem if a plant meets safety regulations. Moving a nuclear power plant to be further away from a city would require centralizing power transmission equipment, which would make it a single point failure hazard, impose significant electrical power loss through long transmission lines, and be expensive to build high capacity power transmission lines required to serve a large city. Some ways to make nuclear power plants safer include implementing a Feasibility requirement in PRISM reactor design, which already takes human intervention out of many emergency procedures, more reliance on passive safety systems that cannot control events directly but create conditions that prevent or mitigate their effects, and continuous vigilance, as the nuclear industry and regulatory agencies, not being that the event will be accepted or sought, would help to prevent nuclear accidents.

What do you mean by “Fukushuras”?

“Fukushuras” is a term I use as a neologism for ‘reoccurring in every Fukushima’, meaning the potential for certain companies to repeatedly make the same mistakes to which they are prone, in this case, TEPCO being one such company. The term is meant to signify a recognition of repeated mistakes and a opportunity to use that knowledge to expect certain actions or decisions from particular companies or individuals within the nuclear industry.

Blog

  • Radioactive Waste 786 – Sandia National Loboratory Is Testing Durability Of Spent Nuclear Fuel Storage Canisters – Part 2 of 2 Parts

    Radioactive Waste 786 – Sandia National Loboratory Is Testing Durability Of Spent Nuclear Fuel Storage Canisters – Part 2 of 2 Parts

    Part 2 of 2 Parts (Please read Part 1 first)
          The construction of a spent nuclear fuel storage canister begins with a flat piece of stainless steel that is rolled into a cylinder and then welded where the edges of the flat piece join. The heat from the welding process creates zones in the seam that experience tensile stress. Stress on these zones around the weld seam makes the seam more susceptible to corrosion from salt over time.
         Sandia received its test canisters on November 13th. Each of them will be outfitted with thirty-two electrical heaters to simulate the heat released as a result of radioactive decay. Thirty-two heating elements are used because the typical storage canister contains thirty-two spent nuclear fuel assemblies which are bundles of fuel rods. Devices called thermocouples which measure temperature and other sensors for diagnostic testing and surface sampling will also be attached to the canisters. 
         Once the setup and tests at Sandia are complete, the canisters will be repacked for shipment to a storage pad at an independent fuel storage facility on the West Coast. There the canisters will be subjected to the same real-life conditions of canisters that are currently in use.
         The Sandia team is led by managers Sylvia Saltzstein and Geoff Freeze, Durbin and includes chemists/corrosion specialists Charles Bryan and Rebeca Schaller. They will be joined by scientists from other national laboratories to monitor the test canisters and record surface deposits for three to over ten years depending on how much variation there is in the data as time passes. Durbin said, “Sodium-chloride, or salt, that settles on the surface of spent nuclear-fuel canisters can lead to chloride-induced stress corrosion cracking, and right now there is inadequate data on these surface deposits.” 
         Durbin said that in real-life storage of nuclear waste in canisters, the decay heat generated by the spent nuclear fuel creates natural convection currents around the canisters which causes outside air to be drawn across the surface of the canisters. These convection currents help to cool the spent nuclear fuel over time. As the ambient air around the canisters is drawn in, salt and other particulates in the air are pulled in as well. They can settle on the canister surface. During the Sandia tests, the electrical heaters installed inside the canisters will replicate the decay heat driven convection process without the need for real nuclear materials.
         In hot and dry conditions, salt deposits alone will not cause any serious issues. However, over time, as the level of decay heat falls and the canisters cool, water can condense on the surface of the canister and a brine can form. Durbin said, “These conditions can occur nationwide and are seen as precursors to chloride-induced, stress-corrosion cracking. Back when these canisters were being designed, people weren’t thinking about this as an issue because we had a plan for permanent disposal. The current national nuclear waste situation forces canisters to be stored onsite for the foreseeable future, which could be 100 years or longer, so stress corrosion cracking becomes more of a concern.”
         In addition to the long-term heating and surface deposition tests, the researchers at Sandia will also utilize another three canisters for tests in the laboratory to conduct research on the cracking that can be caused by salt and stress. This research will focus on the welded seams and intersections of the canisters. The effectiveness of commercially available crack repair and mitigation coatings will be tested. In order to test the seams, the team will slice the canisters into small pieces and test pieces with and without welded seams to study the precursor conditions of salt and stress to cause corrosion that results in the formation of cracks.

  • Geiger Readings for Dec 08, 2020

    Geiger Readings for Dec 08, 2020

    Ambient office = 845 nanosieverts per hour

    Ambient outside = 91 nanosieverts per hour

    Soil exposed to rain water = 89 nanosieverts per hour

    Avocado from Central Market = 92 nanosieverts per hour

    Tap water = 95 nanosieverts per hour

    Filter water = 75 nanosieverts per hour

  • Radioactive Waste 785 – Sandia National Loboratory Is Testing Durability Of Spent Nuclear Fuel Storage Canisters – Part 1 of 2 Parts

    Radioactive Waste 785 – Sandia National Loboratory Is Testing Durability Of Spent Nuclear Fuel Storage Canisters – Part 1 of 2 Parts

    Part 1 of 2 Parts
       With the cooling pools at nuclear plants filling up with spent nuclear fuel, some nuclear power plants will have to shut down if those spent fuel rods cannot be moved out of the pools. The U.S. had plans for a permanent geological repository at Yucca Mountain but those plans were cancelled in 2009. Now the soonest that a repository can be sited, licensed and constructed is 2050. So the spent fuel has to be moved but it will have to be to temporary storage for a few decades either onsite at the power plant or at an temporary storage facility. In order to store the spent nuclear fuel assemblies, concrete and steel cannisters are used.
         The storage canisters which are currently being used for spent nuclear fuel have an intended lifespan of a few decades. However, as the spent fuel continues to accumulate, it is probable that the cylinders already in use may be needed for much longer than originally intended according to Tito Bonano who is nuclear energy fuel cycle manager at Sandia National Laboratory.
          Sandia is carrying out research on the durability of the current nuclear storage canisters. Three twenty-two ton sixteen and one half foot long stainless steel storage canisters are being fitted with heaters and instrumentation which is intended to simulate nuclear waste. These three cylinders were received at Sandia last November. They have never contained any nuclear materials. The purpose of the research is to study the accumulation of salt on canisters over time. The researchers will also study the possibility of salt and stress causing corrosion in another batch of canisters in the next phase of the program.
         More data is needed to validate and guide how the nuclear industry should manage nuclear storage canisters for longer than they were originally designed for. Bonano said “Salt can be present in the ambient air and environment anywhere, not just near the ocean. We need to be able to plan for extended long-term storage of spent nuclear fuel at nuclear power plants for the foreseeable future — it’s a national reality.” Bonano went on to say that his team expects that the project to have very important implications for public health and safety, industry best practices, regulatory frameworks and laying out future research paths.
         The three-year project at Sandia is being funded by the U.S. Department of Energy (DoE) office. Fifteen DoE-owned storage canisters which have never been used are being sent to Sandia and two other national laboratories, an industry research institute and an independent storage facility at an operating nuclear power plant.
         Nuclear power plants use uranium pellets stuffed inside a metal coated tube called a fuel rod. When the nuclear fuel in the rods has been burned up, the rod has to be removed from the reactor and stored onsite before being taken to another storage facility that is either permanent or temporary. Samuel Durbin is a mechanical engineer and Sandia’s canister project lead. He said, “When fuel is removed from a reactor, it’s very hot, both in temperature and radioactivity. The utility loads it into a pool for about five years to cool down. After that, the spent fuel can be offloaded into a dry storage canister.”
    Please read Part 2

  • Geiger Readings for Dec 07, 2020

    Geiger Readings for Dec 07, 2020

    Ambient office = 90 nanosieverts per hour

    Ambient outside = 133 nanosieverts per hour

    Soil exposed to rain water = 141 nanosieverts per hour

    Red bell pepper from Central Market = 90 nanosieverts per hour

    Tap water = 133 nanosieverts per hour

    Filter water = 118 nanosieverts per hour

  • Geiger Readings for Dec 06, 2020

    Geiger Readings for Dec 06, 2020

    Ambient office = 99 nanosieverts per hour

    Ambient outside = 59 nanosieverts per hour

    Soil exposed to rain water = 63 nanosieverts per hour

    Heirloom tomato from Central Market = 72 nanosieverts per hour

    Tap water = 115 nanosieverts per hour

    Filter water = 108 nanosieverts per hour

  • Geiger Readings for Dec 05, 2020

    Geiger Readings for Dec 05, 2020

    Ambient office = 119 nanosieverts per hour

    Ambient outside = 103 nanosieverts per hour

    Soil exposed to rain water = 106 nanosieverts per hour

    Blueberry from Central Market = 92 nanosieverts per hour

    Tap water = 110 nanosieverts per hour

    Filter water = 97 nanosieverts per hour

    Dover sole – Caught in USA = 99 nanosieverts per hour