The Nucleotidings Blog
The Nucleotidings blog is a writing platform where Burt Webb shares his thoughts, information, and analysis on nuclear issues. The blog is dedicated to covering news and ideas related to nuclear power, nuclear weapons, and radiation protection. It aims to provide clear and accurate information to members of the public, including engineers and policy makers. Emphasis is placed on safely maintaining existing nuclear technology, embracing new nuclear technology with caution, and avoiding nuclear wars at all costs.

Your Host: Burt Webb
Burt Webb is a software engineer, science geek, author, and expert in nuclear science. Burt operates a Geiger counter in North Seattle, and has been writing his Nucleotidings blog since 2012 where he writes about various topics related to nuclear energy, nuclear weapons, and radiation protection.

Burt Webb has published several technical books and novels. He works as a software consultant.

Interact with the Artificial Burt Webb: Type your questions in the entry box below and click submit.

Example Q&A with the Artificial Burt Webb

Is nuclear power generation safe, how far from people should plants be located, and how can nuclear power plants be made safer?

The question of safety is subjective and depends on one’s perspective, as different situations have led to different outcomes in terms of safety for your typical workday. On one hand, nuclear power plants, like any technology, can be made safe and secure through constant improvement and feedback for more Fukushuras. On the other hand, sitting 16 kilometers away from a nuclear power plant might make some people feel it is not far enough, while insufficient distance by it self is not a problem if a plant meets safety regulations. Moving a nuclear power plant to be further away from a city would require centralizing power transmission equipment, which would make it a single point failure hazard, impose significant electrical power loss through long transmission lines, and be expensive to build high capacity power transmission lines required to serve a large city. Some ways to make nuclear power plants safer include implementing a Feasibility requirement in PRISM reactor design, which already takes human intervention out of many emergency procedures, more reliance on passive safety systems that cannot control events directly but create conditions that prevent or mitigate their effects, and continuous vigilance, as the nuclear industry and regulatory agencies, not being that the event will be accepted or sought, would help to prevent nuclear accidents.

What do you mean by “Fukushuras”?

“Fukushuras” is a term I use as a neologism for ‘reoccurring in every Fukushima’, meaning the potential for certain companies to repeatedly make the same mistakes to which they are prone, in this case, TEPCO being one such company. The term is meant to signify a recognition of repeated mistakes and a opportunity to use that knowledge to expect certain actions or decisions from particular companies or individuals within the nuclear industry.

Blog

  • Geiger Readings for Jul 30, 2020

    Geiger Readings for Jul 30, 2020

    Ambient office  = 73 nanosieverts per hour

    Ambient outside = 118 nanosieverts per hour

    Soil exposed to rain water = 119 nanosieverts per hour

    English cucumber from Central Market = 123 nanosieverts per hour

    Tap water = 100 nanosieverts per hour

    Filtered water = 88 nanosieverts per hour

  • Nuclear Fusion 85 – A  Mixture of Hydrogen and Boron Is Being Researched As A Fuel For Nuclear Fusion – Part 2 of 18 Parts

    Nuclear Fusion 85 – A Mixture of Hydrogen and Boron Is Being Researched As A Fuel For Nuclear Fusion – Part 2 of 18 Parts

    Part 2 of 18 Parts (Please read Part 1 first)
         In view of the fact that even achieving reliable net energy production with deuterium and tritium has proved extremely difficult, the question could be asked why researchers are working on the even harder hydrogen-boron fusion. The answer to that question is that matter exhibits novel behavior under the impact of “extreme light” that makes possible a “short-cut strategy” to ignite a hydrogen-boron mixture without having to worry about sustainably compressing and heating the plasma. The NIF and similar installations for laser fusion have not been designed to exploit this novel phenomenon.
        In the new approach to hydrogen-boron fusion, a small amount of fuel is shaped into a cylindrical form. One end of the cylinder is then hit with a powerful laser pulse. When the pulse is sufficiently brief, sufficiently powerful and has a sufficiently “clear” form, then very little of the energy generated goes into heating. Instead, the main effect of the laser pulse is to accelerate exposed layers of the fuel mixture to extremely high velocities of more than six hundred miles per second.
        A nonlinear mechanism causes the energy of the laser pulse to be converted with great efficiency into directed motion of the electrons and nuclei of the fuel rather than the random motion usually associated with heat. Analogous to a beam of particles, but with trillions of times higher density, an inwardly accelerated fuel layer rams into the adjacent fuel. This results in igniting an avalanche of hydrogen-boron reactions in a high-temperature “burn wave” that propagates down the axis of the cylinder.
         The inventors of this technique is Professor Heinrich Hora who is an Australian physicist and long-time laser fusion expert. He can make reference to a long series of experiments and theoretical calculations that back up his approach to fusion. These include experiments carried out by several international research groups. They have demonstrated the actual generation of hydrogen-boron reactions by ultra-short, ultra-high-power laser pulse. In recent years, the number of fusion reactions detected in these experiments has rapidly grown. The latest of these experiments was carried out at the Prague Asterix Laser System in Prague, Czechoslovakia. The experiment yielded more than ten billion reactions with a clear pathway for improving the yield by further orders of magnitude. 
       Hora has offered a roadmap of research and development which is aimed at building a prototype hydrogen-boron power plant over the next ten years.  This prototype fusion plant would be much smaller and far simpler to construct and operate that nuclear fission power plants. It also poses no significant safety issues. Hora says that the price tag would be between eighty and one hundred million dollars. This is a very small amount when compared to the cost of building a prototype for a new nuclear fission reactor design. This is true even though nuclear fission is a mature technology. There are four hundred and fifty nuclear fission power reactors in operation around the world.
         The strategy, the roadmap and the high-level scientific cooperation that is forming around the idea of laser fusion of hydrogen-boron fuel is impressive. The list of co-authors of Hora’s technical publications on the hydrogen-boron reaction includes leading scientists from laser laboratories and national research centers in the U.S., China, Israel, Australia, Iran, France, Italy, Spain, the Czech Republic and Poland. Patents have been granted in the U.S., China and Japan. More patents are pending in Europe. Hora has founded a company HB11 energy which intends to raise investor funds and farm out various research and development tasks to existing facilities around the world.
    Please read Part 3 next

  • Geiger Readings for Jul 29, 2020

    Geiger Readings for Jul 29, 2020

    Ambient office  = 109 nanosieverts per hour

    Ambient outside = 103 nanosieverts per hour

    Soil exposed to rain water = 97 nanosieverts per hour

    Tomato from Central Market = 56 nanosieverts per hour

    Tap water = 86 nanosieverts per hour

    Filtered water = 69 nanosieverts per hour

  • Nuclear Fusion 84 – A  Mixture of Hydrogen and Boron Is Being Researched As A Fuel For Nuclear Fusion – Part 1 of 18 Parts

    Nuclear Fusion 84 – A Mixture of Hydrogen and Boron Is Being Researched As A Fuel For Nuclear Fusion – Part 1 of 18 Parts

    Part 1 of 18 Parts    
         My last series of posts dealt with a company called LPP Fusion which is developing a nuclear fusion reactor that will make use of a hydrogen and boron gaseous mixture for fuel. Theoretically, the fusion reaction that takes place between nuclei of hydrogen and nuclei of boron could provide a very efficient, radioactivity free form of nuclear energy with virtually unlimited fuel available. The reaction produces no dangerous penetrating radiation and no radioactive waste. Only stable helium nuclei, also known as alpha particles, are generated by the reaction. The electric charge of these particle allows the direct conversion of fusion energy into electricity.
        These obvious advantages of hydrogen-boron fuel have been known for a long time but, until recently, the extreme physical conditions that are necessary for a hydrogen-boron fusion reactor seemed far beyond current technology.
        However, the situation has changed dramatically because of the development of laser systems which can generate ultra-short pulses of coherent light in the range of a few femtoseconds. A femtosecond is a millionth of a billionth of a second. Also, important discoveries have been made with regard to a technique for amplifying these pulses by up to a trillion times.
         This technique is called chirped pulse amplification (CPA). Gérard Mourou and Donna Strickland were the discovers of this technique and they were awarded a Nobel Prize for their work in 2018. With the assistance of CPA, it is possible to concentrate sufficient energy into an ultra-short pulse so that it reaches powers in the ranges of petawatts. A petawatt is a million billion watts. This is more than one hundred times the power of all electricity generated by all of the electrical power stations in the world combined but only for a tiny fraction of a second.
         At the focus of these laser pulses, the light intensifies to thousands of billions of billions of watts per square centimeter. This can be compared to what would happen if the entire energy that reaches the Earth from the Sun were to be concentrated into a one millimeter spot. This is referred to as “extreme light.” Extreme light is a very exiting new research area for basic and applied physics. It has revolutionary implications for the future of technology. One of the very important areas of research that will be impacted is that of nuclear fusion research.
         The idea of using lasers to trigger fusion reactions has been researched for more than fifty years. The basic concept of the research has been to bombard a tiny sphere of fuel from all sides simultaneously with pulses of energy. This causes the pellet of fuel to compress to extreme densities and to heat up to temperatures that are required for nuclear fusion reactions. The combination of very high temperature and very high density is necessary in order to reach a point referred to as “ignition”. This is a condition in which the reaction process becomes self-sustaining which results in an efficient “microexplosion” with the release of a large amount of energy.
         Pursuit of the laser implosion approach to nuclear fusion resulted in the construction of the world’s biggest laser called the National Ignition Facility (NIF). It was constructed at the U.S. Lawrence Livermore National Laboratory at a cost of over three billion dollars.
        They do not use hydrogen-boron at the NIF. Instead, they combine deuterium and tritium as a fuel which requires less extreme conditions than hydrogen-boron. The deuterium and tritium reaction requires temperatures of around one hundred million degrees and has a much higher rates of fusion reactions than hydrogen-boron fuel.
         Despite some solid accomplishments, NIF has not reached its desired goal of achieving “ignition”. The prospects for constructing commercially viable laser fusion power stations based on the NIF approach appear less possible in the near future.
    Please read Part 2 next

  • Geiger Readings for Jul 28, 2020

    Geiger Readings for Jul 28, 2020

    Ambient office  = 77 nanosieverts per hour

    Ambient outside = 140 nanosieverts per hour

    Soil exposed to rain water = 143 nanosieverts per hour

    Blueberry from Central Market = 75 nanosieverts per hour

    Tap water = 68 nanosieverts per hour

    Filtered water = 54 nanosieverts per hour

  • Nuclear Fusion 84 – A  Mixture of Hydrogen and Boron Is Being Researched As A Fuel For Nuclear Fusion – Part 1 of 17 Parts

    Nuclear Fusion 84 – A Mixture of Hydrogen and Boron Is Being Researched As A Fuel For Nuclear Fusion – Part 1 of 17 Parts

    Part 1 of 17 Parts    
         My last series of posts dealt with a company called LPP Fusion which is developing a nuclear fusion reactor that will make use of a hydrogen and boron gaseous mixture for fuel. Theoretically, the fusion reaction that takes place between nuclei of hydrogen and nuclei of boron could provide a very efficient, radioactivity free form of nuclear energy with virtually unlimited fuel available. The reaction produces no dangerous penetrating radiation and no radioactive waste. Only stable helium nuclei, also known as alpha particles, are generated by the reaction. The electric charge of these particle allows the direct conversion of fusion energy into electricity.
        These obvious advantages of hydrogen-boron fuel have been known for a long time but, until recently, the extreme physical conditions that are necessary for a hydrogen-boron fusion reactor seemed far beyond current technology.
        However, the situation has changed dramatically because of the development of laser systems which can generate ultra-short pulses of coherent light in the range of a few femtoseconds. A femtosecond is a millionth of a billionth of a second. Also, important discoveries have been made with regard to a technique for amplifying these pulses by up to a trillion times.
         This technique is called chirped pulse amplification (CPA). Gérard Mourou and Donna Strickland were the discovers of this technique and they were awarded a Nobel Prize for their work in 2018. With the assistance of CPA, it is possible to concentrate sufficient energy into an ultra-short pulse so that it reaches powers in the ranges of petawatts. A petawatt is a million billion watts. This is more than one hundred times the power of all electricity generated by all of the electrical power stations in the world combined but only for a tiny fraction of a second.
         At the focus of these laser pulses, the light intensifies to thousands of billions of billions of watts per square centimeter. This can be compared to what would happen if the entire energy that reaches the Earth from the Sun were to be concentrated into a one millimeter spot. This is referred to as “extreme light.” Extreme light is a very exiting new research area for basic and applied physics. It has revolutionary implications for the future of technology. One of the very important areas of research that will be impacted is that of nuclear fusion research.
         The idea of using lasers to trigger fusion reactions has been researched for more than fifty years. The basic concept of the research has been to bombard a tiny sphere of fuel from all sides simultaneously with pulses of energy. This causes the pellet of fuel to compress to extreme densities and to heat up to temperatures that are required for nuclear fusion reactions. The combination of very high temperature and very high density is necessary in order to reach a point referred to as “ignition”. This is a condition in which the reaction process becomes self-sustaining which results in an efficient “microexplosion” with the release of a large amount of energy.
         Pursuit of the laser implosion approach to nuclear fusion resulted in the construction of the world’s biggest laser called the National Ignition Facility (NIF). It was constructed at the U.S. Lawrence Livermore National Laboratory at a cost of over three billion dollars.
        They do not use hydrogen-boron at the NIF. Instead, they combine deuterium and tritium as a fuel which requires less extreme conditions than hydrogen-boron. The deuterium and tritium reaction requires temperatures of around one hundred million degrees and has a much higher rates of fusion reactions than hydrogen-boron fuel.
         Despite some solid accomplishments, NIF has not reached its desired goal of achieving “ignition”. The prospects for constructing commercially viable laser fusion power stations based on the NIF approach appear less possible in the near future.
    Please read Part 2 next

  • Geiger Readings for Jul 27, 2020

    Geiger Readings for Jul 27, 2020

    Ambient office  = 98 nanosieverts per hour

    Ambient outside = 149 nanosieverts per hour

    Soil exposed to rain water = 145 nanosieverts per hour

    Red bell pepper from Central Market = 148 nanosieverts per hour

    Tap water = 83 nanosieverts per hour

    Filtered water = 77 nanosieverts per hour