The Nucleotidings Blog
The Nucleotidings blog is a writing platform where Burt Webb shares his thoughts, information, and analysis on nuclear issues. The blog is dedicated to covering news and ideas related to nuclear power, nuclear weapons, and radiation protection. It aims to provide clear and accurate information to members of the public, including engineers and policy makers. Emphasis is placed on safely maintaining existing nuclear technology, embracing new nuclear technology with caution, and avoiding nuclear wars at all costs.
Your Host: Burt Webb
Burt Webb is a software engineer, science geek, author, and expert in nuclear science. Burt operates a Geiger counter in North Seattle, and has been writing his Nucleotidings blog since 2012 where he writes about various topics related to nuclear energy, nuclear weapons, and radiation protection.
Burt Webb has published several technical books and novels. He works as a software consultant.
Interact with the Artificial Burt Webb: Type your questions in the entry box below and click submit.
Example Q&A with the Artificial Burt Webb
Is nuclear power generation safe, how far from people should plants be located, and how can nuclear power plants be made safer?
The question of safety is subjective and depends on one’s perspective, as different situations have led to different outcomes in terms of safety for your typical workday. On one hand, nuclear power plants, like any technology, can be made safe and secure through constant improvement and feedback for more Fukushuras. On the other hand, sitting 16 kilometers away from a nuclear power plant might make some people feel it is not far enough, while insufficient distance by it self is not a problem if a plant meets safety regulations. Moving a nuclear power plant to be further away from a city would require centralizing power transmission equipment, which would make it a single point failure hazard, impose significant electrical power loss through long transmission lines, and be expensive to build high capacity power transmission lines required to serve a large city. Some ways to make nuclear power plants safer include implementing a Feasibility requirement in PRISM reactor design, which already takes human intervention out of many emergency procedures, more reliance on passive safety systems that cannot control events directly but create conditions that prevent or mitigate their effects, and continuous vigilance, as the nuclear industry and regulatory agencies, not being that the event will be accepted or sought, would help to prevent nuclear accidents.
What do you mean by “Fukushuras”?
“Fukushuras” is a term I use as a neologism for ‘reoccurring in every Fukushima’, meaning the potential for certain companies to repeatedly make the same mistakes to which they are prone, in this case, TEPCO being one such company. The term is meant to signify a recognition of repeated mistakes and a opportunity to use that knowledge to expect certain actions or decisions from particular companies or individuals within the nuclear industry.
I have blogged before about NASA’s use of nuclear isotopes for thermal batteries in space probes. Nuclear batteries provide the long term reliable and maintenance free power needed for long space missions. Now NASA is considering the use of nuclear fission reactors fueled with uranium for installations on Mars.
In the 1960s, NASA worked on fission reactors for use in space missions. The Systems for Nuclear Auxiliary Power (SNAP) research project resulted in two types of nuclear reactors. The first system was the radioisotope thermoelectric generators (RTG) which utilize heat from the decay of radioactive elements such as plutonium to generate electricity. The RTGs have provided power for dozens of space probes.
The second technology developed by the SNAP program was a fission reactor called the SNAP-10A. It was the only U.S. nuclear power reactor that has even operated in space. After launch in early April of 1965, it ran successfully for forty three days before the failure of unrelated equipment in the spacecraft brought an end to the demonstration.
NASA has provided funds for other nuclear power technology development projects after SNAP but those projects were ultimately abandoned for a variety of reasons including problems with funding, political issues and technical problems.
In 2010, NASAs interest in fission reactors was reawakened because of a study reviewing options for power systems to be used in space missions. In 2014, NASA’s Game Changing Development program provided funds for a program called Kilopower. The goal of this fifteen million dollar project was to build and test a small nuclear fission reactor by September 30, 2017 at the Nevada National Security Site near Las Vegas. The testing is scheduled to be completed by January of 2018. If the tests are successful, then NASA will begin work on a bigger system for testing on Mars or other long space mission.
The Kilopower reactor is about six and a half feet tall. It is designed to produce as much as a kilowatt of electricity. However, the test reactor will not include the Stirling engines that are part of the full design. The Stirling engines convert the energy of the fission reactors into heat. The tests will use thermal simulators to verify that the reactor is generating the desired output.
NASA engineers estimate that human expeditions to Mars will require systems that can generate about forty kilowatts of power. The greatest power requirements for future human Mars expeditions will be the equipment that is needed to produce fuel, air, water, run the habitat and power scientific equipment. NASA plans call for sending four or five small ten kilowatt fission reactors to Mars.
NASA considered the use of solar panels to generate electricity on Mars but that would restrict missions to areas of Mars that received enough sunlight to provide the needed energy. The places on Mars that receive the most sunlight only get about a third of the solar energy that sunny places receive on Mars. There is also the problem of the regular dust storms on Mars that would block sunlight even in sunny areas.
Artist’s concept of four nuclear fission reactors on Mars:
Researchers at Sandia National Laboratories (SNL) have been working on the science of scintillators which can be used to detect nuclear threats. They have made a significant breakthrough that will allow such devices to be both more efficient and cheaper to make. The new scintillators are made of an organic glass which is a carbon-based material that can be melted but does not crystallize when it is cooled. It also does not become translucent or opaque when cooled.
For forty years, the crystalline form of a molecule called trans-stibene has been the best material for scintillators. Trans-stibene can tell the difference between gamma rays which are common in the natural environment and neutrons which are primarily produced by materials such as plutonium and uranium which are dangerous radioactive materials that can be used to make weapons. Trans-stibene produces bright light in the presence of both of these types of radiation. Unfortunately, trans-stibene is very expensive to produce and is not common in devices used outside of a laboratory.
The most common materials used in scintillators for use in the field are plastic. They are cheap and can be made into large shapes which is important for the sensitivity of the scintillator. Plastics are not good at distinguishing gamma rays and neutrons. The detectors have to include a tube of helium to make this distinction. The particular isotope of helium used for these tubes is rare, expensive and non-renewable which makes the detectors more expensive and complex. Plastics are also less sensitive and emit less light than trans-stibene.
SNL began working on scintillator technology in 2010 with the goal “strengthen national security by improving the cost-to-performance ratio of radiation detectors at the front lines of all material moving into the country.” The team worked on combining the best and most sensitive scintillator material with the lower cost of less sensitive materials.
The SNL team tested different scintillator materials that they had synthesized to better understand the relationship between molecular structures and radiation detection properties. They were able to create scintillator materials that could differentiate between dangerous radioactive materials that could be use for weapons and other non-threatening nuclear materials used in industry and medicine.
A major breakthrough happened in June of 2016 with the realization that scintillators were a lot like light-emitting diodes (LEDs). LEDs produce light when electrical current is supplied to a material. Scintillators produce light when bombarded with radiation. Depending on the intensity of light and the speed of the appearance of the light, the nature of the radiation can be identified. It turned out that fluorine, a light emitting material used in some LEDs could be included in the scintillator compounds being made by the lab. This led to the best combination of features including stability, transparency and brightness.
The organic glasses being developed at SNL are much brighter than the plastics and they can distinguish gamma rays from neutrons. The incorporation of fluorene yielded stable organics glasses that could be made into large shapes for detectors that could be deployed for wide use. The next step is to create prototype detectors that can be tested in real life conditions. The team also needs to give their new scintillators the ability to tell the difference between dangerous radioactive materials and normal-use radioactive materials. The National Nuclear Security Administration is funding the project for an additional two years.