Nuclear Power 2 - History 2 - 1970 - 1990

            As nuclear power plants were built and produced power in the 1960s, local protests began to appear. Some scientists also started to raise concerns about nuclear power. There were fears of nuclear accidents, spread of nuclear weapons, cost overruns on power plant construction, terrorist use of nuclear materials and nuclear waste. By 1970, world production f nuclear power had reached one gigawatt or one billions watts).

             In the early 70s, big protests broke out against the construction of a nuclear power plant in Wyhl, Germany. The cancellation of the plant in 1975 inspired protests in other parts of Europe and in North America. The oil crisis in 1973 put pressure on countries such as Japan and France to find an alternative to oil fired power plants. They turned to nuclear energy as a substitute. Hundreds of thousands of people participated in multiple protests in France and Germany in the late 70s.

            In 1979, there was an accident at the Three Mile Island nuclear power plant in Dauphin County, Pennsylvania. Confusing controls and operator error led to the loss of large amounts of coolant which resulted in a partial meltdown of the fuel rods. This caused a release of small amounts of radioactive gases and iodine-131 into the environment.  For days, the owners of the plant and government authorities floundered as they tried to deal with the crisis. Poor communication with the public, confusion over the possible need for an evacuation and authorization of the release of fourty thousand gallons of radioactive waste water into the Susquehanna River undermined the credibility of the plant owners and the government with the public. An extended investigation led to the conclusion that there was no health danger from the accident. Clean up ultimately cost one billion dollars.

            World wide nuclear power production reached one hundred gigawatts by 1979. Rising construction costs due to construction delays and regulatory problems, dropping fossil fuel costs, public fears stoked by the Three Mile Island accident, law suits brought by groups opposing nuclear power and a lowering of demand for electrical power in the late 70s had major impacts on plant construction in the 70s. Sixty three nuclear power units were cancelled between 1975 and 1980.

            Nuclear power plant construction slowed in the 1980s due to the problems mentioned above. Many proposed plants were cancelled in the face of protests, law suits, rising costs and lower energy demands.

            In 1986, there was a terrible accident at the Chernobyl Nuclear Power Plant in Ukraine. A power surge triggered an attempt to run an emergency shut down which resulted in a greater power surge. This second surge ruptured a reactor vessel and exposed graphite moderator rods to the air. The resulting explosion and fire released large amounts of radioactive contamination into the atmosphere in the form of dust and smoke. The prevailing winds carried the radioactivity over much of the Western Soviet Union and Western Europe. Over three hundred thousand people were evacuated from parts of  Belarus, Russia and Ukraine. More that half of the radioactive fallout fell on Balarus.

            While the Chernobyl accident had a huge impact on public fear of nuclear power, it did not have a great effect on the regulation in Europe and the United States because the design of the Chernobyl reactor was a uniquely Soviet design.

            The World Association of Nuclear Operators was created in 1989 as a direct result of the Chernobyl accident to help the operators of nuclear power plants achieve the highest levels of safety and reliability.

            Where the 70s saw a huge increase in nuclear power generation, in the 80s the world capacity only tripled from one hundred gigawatts to three hundred gigawatts.

Nuclear Power 1 - History 1 - Beginnings to 1970

In the early Twentieth Century, it was discovered that radioactive elements could release great amounts of energy according to Albert Einstein's famous equation, E = MC2. This equation says that the energy in a quantity of matter is equal to that quantity of matter multiplied by the speed of light squared. There are approximately twenty five million kilowatt hours of energy in one gram of matter.

Radiation Basics 10

Nuclear Fission

            Unstable atomic nuclei undergo spontaneous decay involving the emission of gamma rays, electrons (beta particles), helium nuclei (alpha particles), protons and neutron. In this process, only a few elementary particles escape the nuclei of the decaying atom. There is another nuclear process that involves the decomposition of atoms. This process is called nuclear fission.

Radiation Basics 9

Biological Damage of Ionizing Radiation

            The biological damage of ionizing radiation occurs at the level of the cell. Radiation can tear apart the DNA in the nucleus of the cell. Most breaks in DNA are repaired within twenty four hours but twenty four percent of those repairs are incorrect. If the damage is severe enough, it will kill the cell in a process called apoptosis where the cell go through a process of programmed cell death. If the damage to DNA does not kill the cell, it can cause changes in the DNA sequence known as mutations. These can be passed to daughter cells when the damaged cell divides and cause cancerous tumors. Since the DNA contains the recipe for all the proteins in the human body as well as instructions for the manufacture of proteins, abnormal proteins or abnormal protein production can be the result leading to premature aging and cancer.

Radiation Basics 8

Radioactivity in the Human Body

            Radioactivity is definitely a threat to our health. It has been said that there is no safe minimum dose of radiation but we seem to survive in a natural environment with many different sources of radiation both outside and inside our bodies. On the average, there are over 800 radioactive events in the human body every second. Here is a list of the radioactive isotopes in our bodies.

(There are 28.3 grams in one ounce, one thousand milligrams in a gram, on million micrograms in a gram, one billion nanograms in a gram, one trillion picograms in a gram, and one quadrillion femto grams in a gram, and one thousand grams in a kilogram)

Potassium-40 - 16.5 milligrams - 4,340 disintegrations per second

Carbon-14  - 16 nanograms - 3080 disintegrations per second

Rubidium-87 - 190 milligrams - 600 disintegrations per second

Lead-210 - 5400 picograms - 15 disintegrations per second

Helium-3 - 20 femtograms - 7 disintegrations per second

Uranium-238 - 100 micrograms - 3-5 disintegrations per second

Radium-228 - 46 femtograms - 5 disintegrations per second

Radium-226 36 micrograms - 3 disintegrations per second

            The uranium, potassium and rubidium in our bodies were created in stellar explosions before the Earth was formed. The lead and radium isotopes were created by thorium and uranium decay. Helium-3 and Carbon-14 are being continuously created by cosmic rays bombarding the atmosphere of the Earth.

            Potassium-40 is present in all the food that we eat in tiny quantities. Potassium is abundant in our environment and plants take it up from the soil. We consume about two and one half grams of potassium every day. It is an essential part of our diet and our bodies maintain a constant level.

            Carbon-14 makes up a tiny amount of the roughly 16 kilograms of carbon in our bodies. It is constantly being created by cosmic rays interacting with nitrogen in the atmosphere. All living things breath in tiny amounts of carbon-14 as their bodies constantly replace carbon. Carbon-14 can be used to date the age of a biological material because when something dies, it stops taking in carbon-14 which decays and slowly disappears.

Radiation Basics 6

Man-made Radioactivity

            In the course of the evolution of civilization, mankind has created a number of sources of radiation which contribute to radiation exposure of people. These include substances, medical equipments, consumer devices and building materials.

            Sources of radiation that impact the average individual in industrialized countries include tobacco which contains thorium and uranium, televisions which emit x-rays, medical X-rays, smoke detectors which contain americium, and lantern mantles which contain thorium.

            Modern medicine utilizes a large variety of radioactive isotopes which include: bismuth-213, cesium-137, carbon-11, chromium-51, cobalt-57, cobalt-60, copper-64,  dysprosium-165, erbium-169, fluorine-18, gallium-67, gold-198, holmium-166, indium-111, iodine-123, iodine-125, iridium-192, iron-59, krypton-81, lutetium-177, nitrogen-13, oxygen-15, palladium-103, phosphorus-32, potassium-42, rhenium-188, rubidium-82, samarium-153, selenium-75, sodium-24, strontium-89, strontium-92, technetium-99, thallium-201, xenon-133 (5 d), ytterbium-169, and yttrium-90. These isotopes, with the exception of cesium, have half lives for seconds to days. They are used for diagnosis of many conditions, imaging of different parts of the body and treatment of a variety of disease.

            Most building materials from natural sources contain small quantities of radium 226, uranium 238 and Thorium 232 as well as radionuclides which are the result of decay of these isotopes. Radon 22 and radon 220 are gases which are injected into the interior air of builds from the decay in the building materials.

            Recycled industrial by-products contain radioactive isotopes which have been concentrated above normal background levels in industrial processes. These include coal ash from the burning of coal which is an additive in cement, coal slag is used in floors as an insulating fill, phosphogypsum which is a by-product of the production of phosphorous fertilizers and red mud which is a waste product in aluminum manufacture used in bricks, ceramics and tiles.

            Some professions expose workers to radioactivity. Workers who mine uranium and process uranium are exposed to the natural radioactivity of uranium. Nuclear power plant workers and power plant inspectors can be exposed to uranium 235 and plutonium. Nuclear medicine technician can be exposed to any of the radioisotopes mentioned in the paragraph above on nuclear medicine. Radiography and X-ray technicians are exposed to x-rays.

Radiation Basics 6

Man-made Radioactivity

            In the course of the evolution of civilization, mankind has created a number of sources of radiation which contribute to radiation exposure of people. These include substances, medical equipments, consumer devices and building materials.

            Sources of radiation that impact the average individual in industrialized countries include tobacco which contains thorium and uranium, televisions which emit x-rays, medical X-rays, smoke detectors which contain americium, and lantern mantles which contain thorium.

            Modern medicine utilizes a large variety of radioactive isotopes which include: bismuth-213, cesium-137, carbon-11, chromium-51, cobalt-57, cobalt-60, copper-64,  dysprosium-165, erbium-169, fluorine-18, gallium-67, gold-198, holmium-166, indium-111, iodine-123, iodine-125, iridium-192, iron-59, krypton-81, lutetium-177, nitrogen-13, oxygen-15, palladium-103, phosphorus-32, potassium-42, rhenium-188, rubidium-82, samarium-153, selenium-75, sodium-24, strontium-89, strontium-92, technetium-99, thallium-201, xenon-133 (5 d), ytterbium-169, and yttrium-90. These isotopes, with the exception of cesium, have half lives for seconds to days. They are used for diagnosis of many conditions, imaging of different parts of the body and treatment of a variety of disease.

            Most building materials from natural sources contain small quantities of radium 226, uranium 238 and Thorium 232 as well as radionuclides which are the result of decay of these isotopes. Radon 22 and radon 220 are gases which are injected into the interior air of builds from the decay in the building materials.

            Recycled industrial by-products contain radioactive isotopes which have been concentrated above normal background levels in industrial processes. These include coal ash from the burning of coal which is an additive in cement, coal slag is used in floors as an insulating fill, phosphogypsum which is a by-product of the production of phosphorous fertilizers and red mud which is a waste product in aluminum manufacture used in bricks, ceramics and tiles.

            Some professions expose workers to radioactivity. Workers who mine uranium and process uranium are exposed to the natural radioactivity of uranium. Nuclear power plant workers and power plant inspectors can be exposed to uranium 235 and plutonium. Nuclear medicine technician can be exposed to any of the radioisotopes mentioned in the paragraph above on nuclear medicine. Radiography and X-ray technicians are exposed to x-rays.

Radiation Basics - 5: Natural Radioactivity

            Natural radioactivity is present in the air, water and soil around us. Some of the radioactive isotopes were created in with the universe. Others are generated by radioactive decay of other elements. Cosmic ray from space create still others by interacting with terrestrial elements. The half-lives of these naturally occurring radionuclides vary from days to billions of years.

Radiation Basics 4

Measuring Radioactivity

            There are a several different units of measurement for radiation emitted and absorbed from radioactive materials. Exposure is measured in terms of a particular amount of radiation per a particular duration of time.

Pages