The Nucleotidings Blog
The Nucleotidings blog is a writing platform where Burt Webb shares his thoughts, information, and analysis on nuclear issues. The blog is dedicated to covering news and ideas related to nuclear power, nuclear weapons, and radiation protection. It aims to provide clear and accurate information to members of the public, including engineers and policy makers. Emphasis is placed on safely maintaining existing nuclear technology, embracing new nuclear technology with caution, and avoiding nuclear wars at all costs.

Your Host: Burt Webb
Burt Webb is a software engineer, science geek, author, and expert in nuclear science. Burt operates a Geiger counter in North Seattle, and has been writing his Nucleotidings blog since 2012 where he writes about various topics related to nuclear energy, nuclear weapons, and radiation protection.

Burt Webb has published several technical books and novels. He works as a software consultant.

Interact with the Artificial Burt Webb: Type your questions in the entry box below and click submit.

Example Q&A with the Artificial Burt Webb

Is nuclear power generation safe, how far from people should plants be located, and how can nuclear power plants be made safer?

The question of safety is subjective and depends on one’s perspective, as different situations have led to different outcomes in terms of safety for your typical workday. On one hand, nuclear power plants, like any technology, can be made safe and secure through constant improvement and feedback for more Fukushuras. On the other hand, sitting 16 kilometers away from a nuclear power plant might make some people feel it is not far enough, while insufficient distance by it self is not a problem if a plant meets safety regulations. Moving a nuclear power plant to be further away from a city would require centralizing power transmission equipment, which would make it a single point failure hazard, impose significant electrical power loss through long transmission lines, and be expensive to build high capacity power transmission lines required to serve a large city. Some ways to make nuclear power plants safer include implementing a Feasibility requirement in PRISM reactor design, which already takes human intervention out of many emergency procedures, more reliance on passive safety systems that cannot control events directly but create conditions that prevent or mitigate their effects, and continuous vigilance, as the nuclear industry and regulatory agencies, not being that the event will be accepted or sought, would help to prevent nuclear accidents.

What do you mean by “Fukushuras”?

“Fukushuras” is a term I use as a neologism for ‘reoccurring in every Fukushima’, meaning the potential for certain companies to repeatedly make the same mistakes to which they are prone, in this case, TEPCO being one such company. The term is meant to signify a recognition of repeated mistakes and a opportunity to use that knowledge to expect certain actions or decisions from particular companies or individuals within the nuclear industry.

Blog

  • Nuclear Reactors 756 – Energy Impact Center Is Launched To Provide Open-Source Designs For Small Modular Reactors – Part 2 of 2 Parts

    Nuclear Reactors 756 – Energy Impact Center Is Launched To Provide Open-Source Designs For Small Modular Reactors – Part 2 of 2 Parts

    Part 2 of 2 Parts (Please read Part 1 first)
        Kugelmass is not the only entrepreneur who is certain that reducing reactors is the best way to renew interest in the expansion of nuclear power. SMRs are being researched and developed by several different companies. NuScale in the U.S. is almost ready to deploy its first SMR plant. Rolls-Royce in the U.K. is seeking a site for their SMR plant. Both the Chinese and the Russian governments are dedicating significant resources to the development and testing of SMR designs.
        There are many unresolved questions and serious challenges to the development, licensing, construction and deployment of SMRs. In view of the fact that serious cost overruns and extended schedules are common in the nuclear power industry, any suggestion that it will be easy to decrease the cost and time necessary to deploy an SMR must be viewed skeptically. The current OPEN100’s blueprints are only 3D shells of components including reactor vessels and turbines. The blueprints do not contain any information about how the components are connected or how they are intended to operate. The website of EIC says that they will be providing more detailed models and construction information in coming months.
        Many experts are skeptical that the transformative shift to SMRs will be as great as proponents claim. The critics say that SMRs will be challenged with the same cost and safety concerns as the standard light water reactors in use today.
         Kugelmass is very enthusiastic about the increased safety that SMRs will offer. He points to the low number of casualties associated with the Fukushima meltdowns in 2011 to reinforce his contention that nuclear power plants are no more inclined to serious accidents than other industrial plants and consequences are mild.
         However, concerns about the safety of commercial power reactors is not confined to worries about meltdowns. All commercial nuclear power plants today generate large quantities of long-lived radioactive waste the disposal of which has no universal solution. Regardless of what the facts may be with respect to the safety of nuclear power, there is wide-spread concern among the public. Politicians, investors and the general public are not convinced that nuclear power is safe and the best answer to fighting climate change.
        The costs associated with the deployment and operation of renewable energy sources is falling rapidly. In addition, utility-scale energy storage systems are beginning to provide solutions to the intermittency problems associated with wind and solar power systems. The fact is that if these trends continue, they will reduce the justification for making major investments in new nuclear technology. However, some studies have concluded that even if solar and wind intermittency are solved by improving battery storage capacity and lowering battery costs, wind and solar alone will not provide sufficient low-carbon electricity generation necessary to meet future energy demands.
         Kugelmass is not persuaded to give up his quest for SMRs by these problems. In addition to the launch of EIC, he has also started a for-profit spin-off from EIC called Last Energy. The purpose of Last Call will be to connect private investors with new opportunities to be involved in nuclear projects around the world.

  • Geiger Readings for Mar 03, 2020

    Geiger Readings for Mar 03, 2020

    Ambient office  = 114 nanosieverts per hour

    Ambient outside = 90 nanosieverts per hour

    Soil exposed to rain water = 95 nanosieverts per hour

    Asparagus from Central Market = 124 nanosieverts per hour

    Tap water = 93 nanosieverts per hour

    Filtered water = 86 nanosieverts per hour

  • Nuclear Reactors 755 – Energy Impact Center Is Launched To Provide Open-Source Designs For Small Modular Reactors – Part 1 of 2 Parts

    Nuclear Reactors 755 – Energy Impact Center Is Launched To Provide Open-Source Designs For Small Modular Reactors – Part 1 of 2 Parts

    Part 1 of 2 Parts
        There is a lot of excitement in the nuclear industry about what are called small modular reactors (SMRs). SMRs would produce three hundred megawatts or less of electricity. They would be produced as modules in a factory with tight quality control and economies of scale. SMR modules would be small enough to transport via truck, rail or cargo plane to the site of operations where they would be assembled.
        Bret Kugelmass is an entrepreneur who sold his drone company Airphrame in 2017 in order to focus his energy on fighting climate change. He has founded a non-profit research company named the Energy Impact Center (EIC) to find “accelerated pathways” to decarbonize the global economy by 2040. He believes that the best response to climate change is the use of nuclear power.
       Last week, EIC launched their OPEN100 project to serve as a foundation for new SMR nuclear power plant construction. It will offer developers a number of resources such as a web interface to help visualized plant and component design, cost studies and construction plans. The open-source format is intended to allow startups, engineering firms, global utilities and capital markets to align around a common framework.
         Kugelmass says the new project will make open-source blueprints for the design, construction and financing of a one hundred-megawatt SMR available. He says that his new SMR can be built for about three hundred million dollars in about two years. This would be a very substantial drop in both cost and time for the construction of a nuclear power reactor. 
         Kugelmass said “When we first got started we were under the assumption public perception might be an issue but as we continued to interview experts around the world we realized there were dozens of countries desperate for nuclear and the only thing holding them back was cost—cost driven by unnecessary complexity, borrowing risk of high capital outlay, and lengthy construction periods.”
         Kugelmass went on to say “Nuclear power isn’t just part of the solution to addressing climate; it is the solution. OPEN100 will radically change the way we deploy nuclear power plants going forward, offering a substantially less expensive and less complicated solution. The goal of the project is to accelerate the development of nuclear power, offering the world an affordable alternative to fossil fuels.”
         One of the major problems with the serious expansion of nuclear power generation to fight climate change is the cost of construction of nuclear power plants. Kugelmass attributes the high cost to a focus on large and very complicated reactors that take far too long to license and build. He has decided that the best way to overcome the cost problem is to start with the design of conventional pressurized water reactors and drive the cost down through standardization and factory construction to allow rapid construction.
        In order to begin the project, EIC conducted fifteen hundred interviews with experts in subjects such as technology, economics and policy and over one hundred site visits across fifteen countries The EIC team then used this analysis to create an open source template for designing and constructing a nuclear power plant.
    Please read Part 2 next

  • Geiger Readings for Mar 02, 2020

    Geiger Readings for Mar 02, 2020

    Ambient office  = 104 nanosieverts per hour

    Ambient outside = 103 nanosieverts per hour

    Soil exposed to rain water = 104 nanosieverts per hour

    Broccoli from Central Market = 106 nanosieverts per hour

    Tap water = 102 nanosieverts per hour

    Filtered water = 95 nanosieverts per hour

  • Geiger Readings for Mar 01, 2020

    Geiger Readings for Mar 01, 2020

    Ambient office  = 113 nanosieverts per hour

    Ambient outside = 115 nanosieverts per hour

    Soil exposed to rain water = 118 nanosieverts per hour

    Crimini mushroom from Central Market = 136 nanosieverts per hour

    Tap water = 119 nanosieverts per hour

    Filtered water = 111 nanosieverts per hour

  • Geiger Readings for Feb 29, 2020

    Geiger Readings for Feb 29, 2020

    Ambient office  = 113 nanosieverts per hour

    Ambient outside = 132 nanosieverts per hour

    Soil exposed to rain water = 129 nanosieverts per hour

    Blueberry from Central Market = 77 nanosieverts per hour

    Tap water = 91 nanosieverts per hour

    Filtered water = 81 nanosieverts per hour

    Dover sole – Caught in USA = 108 nanosieverts per hour