Nuclear Fusion 100 – Powerful Lasers And A Mixture of Hydrogen and Boron Are Being Researched As The Basis For Nuclear Fusion Power Generation – Part 17 of 18 Parts

Part 17 of 18 Parts (Please read Parts 1 thru 16 first)
    In 2012, the research group of Shinsuke Fujioka at the Institute of Laser Engineering in Osaka, Japan succeeded in generating fields of great intensity with a simple method that utilized laser pulses. For this experiment, they used the Gekko XII laser, built for laser fusion experiments. The laser produced a short nanosecond pulse with a power of about ten trillion watts.
     The experimental setup consisted of two parallel metal plates connected by a piece of wire shaped into a loop. One of the plates has a small circular hole in it through which the laser pulse can illuminate a small area of the opposing surface of the second plate. When the intense Gekko laser pulse hits the lower plate through the hole, it converts the upper layers of the metal of the plate into a plasma. The electrons are torn away from their nuclei and quickly accelerated to velocities near the speed of light.
     An enormous number of these electrons fly across the gap between the two plates and land on the upper plate which gives it a high negative charge. For an instant, the positively charged nuclei of the vaporized metal are left behind because they are much more massive than the electrons and are slower to respond.
     An enormous electric potential difference builds up between the upper and lower plates. This causes an electric current to flow through the wire that connects the two plates. The loop in the wire functions as a single-turn coil, generating an extremely intense magnetic field pulse. The Japanese researchers have measured magnetic fields strengths of over fifteen hundred Tesla which is more than strong enough for Hora’s requirements.
     The Hora reactor design should produce energy in the form of repeated microexplosions inside an explosion chamber. The rate of the laser pulses may be about one per second. Each microexplosion yields about one gigajoule of energy which is equivalent to around two hundred and eighty kilowatt hours. Calculating on the basis of one laser pulse per second, this would yield a gross power output of about one gigawatt which is the output of a conventional nuclear fission reactor.
      The fuel pellets for the microexplosions come in the form of long thin cylinders which are about a tenth of a millimeter in diameter and about a centimeter long. Each pellet contains about fourteen milligrams of hydrogen and boron. The fuel cylinder is suspended in small assembly with two capacitor plates connected by two conducting loops. The purpose of the loops is to generate a powerful magnetic field parallel to the cylindrical axis at the moment of the ignition of the microexplosion as demonstrated by the experiments of Fujioka and his team. Each microexplosion is generated using a pair of precisely-timed, nearly simultaneous ultra-short pulse from two lasers.
     The pulse from Laser 1 generates a powerful one thousand tesla magnetic field parallel to the cylindrical axis. The pulse for Laser 2 is focused on one end of the fuel cylinder. It ignites the hydrogen-boron reactions and sets off a “burn wave” than propagates through to the opposite end. The magnetic field is used to ensure that the plasma does not expand much until the burn-up is complete.
     
Please read Part 18