Nuclear Fusion 93 – Powerful Lasers And A Mixture of Hydrogen and Boron Are Being Researched As The Basis For Nuclear Fusion Power Generation – Part 10 of 18 Parts

Part 10 of 18 Parts (Please read Parts 1 thru 9 first)
     For the first time, in the mid-1980s Gérard Mourou and his then-student Donna Strickland, working at the University of Rochester Laser Laboratory succeeded in the application of the “chirping” concept to the problem of amplifying ultra-short laser pulse. They used a pair of diffraction gratings in place of the delay network used in radar systems. These gratings separate different frequencies of light in the short pulse into a “rainbow” of frequencies. This forces the higher frequencies to go through a longer path than the lower frequencies.
     This system causes the higher frequency components of the pulse to lag behind as the pulse travels into the amplifier. The original, weak but ultra-short pulse produced by the laser oscillator is stretched out by the first pair of diffraction gratings into a one thousand plus longer pulse of rising frequency. The resulting “stretched” pulse runs through a laser amplifier where the total energy can be increase to huge powers without causing damage to the amplifier components. Finally, a second pair of diffraction gratings operates in reverse to reassemble the long pulse at the exit to the system into a single ultra-short of tremendous power. The pulse can be amplified by trillions of times.
     With the advent of chirped pulse amplifications, femtosecond-range lasers with powers in the millions of billions of watts or petawatts are operating in laboratories around the world.
     When such a pulse from a laser is focused on a target, incredible things occur from the domain of nuclear physics and elementary particle physics. These phenomena include transmutation of atoms and other nuclear reactions, generation of ultra-high energy particle beams and the acceleration of macroscopic object known as plasma blocks to speeds of one thousand kilometers per second and beyond.
     Despite their huge intensity, laser pulses with sharp edges (high contrast ratio) generate almost no heat when they pass through physical materials. Instead, their energy is converted into organized, directed processes. Heat has no time to develop and only appears later when the process is completed.
     As laser intensities continue to increase at an exponential rate, theoretical physicists are dreaming of reaching intensities at which something called “vacuum breakdown” occurs in which matter is created “out of nothing” from energy alone can be observed directly.
    Internationally, there is a race to reach higher and higher pulse powers, pulse intensities and the number of pulses that can be produced per minute. The European Extreme Light Infrastructure (ELI) project will produce laser powers in the ten petawatt range.  China’s Shanghai Superintense Ultrafast Laser Facility (SULF) hopes to reach levels of one hundred petawatts by 2023. Russia’s projected Center for Extreme Light Studies (XCELS) is planned to reach two hundred petawatts with future plans of going as high as one thousand petawatts. The US is racing to regain the leader with the Zettawatt-Equivalent Ultrashort Pulse Laser System (ZEUS) to be built at the University of Michigan. Zeus will utilize colliding laser and electron beams to reach powers of a million petawatts or one zettawatt.
      There is no lack of credible promises of practical applications such as new materials and production methods, applications to medical diagnosis and treatment, the treatment and elimination of nuclear waste and last, but certainly not least, nuclear fusion for commercial power generation. However, the best anticipated form of nuclear fusion which produces no radioactivity is the hydrogen-boron approach and that does not depend on any of the megaprojects mentioned above.
Please read Part
11 next